TLS Quad Coupler 1.5 Finish:Black 1" x 6″ × 31-3/8"

1" x 6″ × 31-3/8" 6061T-6 Aluminum CNC machined with pockets to support one piece of 30" truss

This positive identification increases safety and aids in the inspection process

This bearing is installed on the end of the First Pinion and fits all Prostar Hoists

KASK helmets can easily integrate with the SC3 earmuffs with a bayonet adapter

The assembly includes all of the parts listed in the Section Diagram and a 24V Reversing Contactor

TLS Quad Coupler 1.5 Finish:Black 1" x 6″ × 31-3/8"The Quad Coupler 1. 5 will clamp from 1. 25 OD to 1. 5 OD tubing, as well as 1" pipe (1. 315" OD.) The Quad Coupler 1. 5 is 1. 25" thick. The notch on the outside of clamp is 1. 26" across the flats and will fit over 1 1 4" square tube, while locking the clamp parallel with the 1 1 4" square tubing. Use the flat face to bolt to a fixture, or to allow the Quad Coupler 1. 5 to rotate when fastened to square tubing. The distance from the bottom of the